Parts needed :
a standard Garm mini
some plastic card
the last 10 mm of a Templar's Gauss rifle
Tools : Saw, 2 files (flat and round), exacto knife.
I chose to redo the CT LRM 10, and place it where the design sets it, in the Left Torso. To do so, I decided I'd have some closed launcher tubes, a bit like the WHM-IIC4 ATMs. I cut a 10 squares bit of plastic card with the exacto knife. Then I cut off the top right 2 squares, and reorganized them like this :
At that stage, I used the flat file to thin the back of the launcher, and the round file to adapt it to the Garm's torso, This done, I glued them like this :
Right arm :
I sawed off with my saw the forward 10 mm of a spare Templar's Gauss Rifle, and put it aside. Then, I worked on the UAC5's barrel to broaden its caliber, I used a 1/8 '' drill to do this. It was then time to glue the barrel on the shoulder, like this :
All that is left to do now is glue the shoulder to the torso, and paint!